| Stuck Wire Wheels |
|---|
| Because servicing them is a dirty job, wire wheels are perhaps the most neglected components on a British car. Many times I've bought or worked on a car and found it nearly impossible to remove one of the wheels! This is likely due to very hard, dried-up grease which essentially freezes the wheel on. I've heard about many techniques for removing stuck wheels with torches and chisels, and even trying to drive around without the knock-offs installed to loosen the the wheel. Before resorting to such drastic measures, try using a can of carburetor cleaner to dissolve dried up grease. Jack the car up, remove the knock-offs and spray well up into the cavity between the wheel hub and the splined extension, The carb cleaner will dissolve hardened grease in short order. Be sure to place a pan or tray under the wheel to catch the dissolved grease and carb cleaner. Let the carb cleaner soak in for a few minutes and repeat the process while wiggling the wheel around to help break up hardened grease. Unless the splines have become jammed together on the extension, this will allow you to remove the wheel easily. |
Questions, Comments? Please Contact ASH
Page Last Updated: 22 Sep 2017 at 10:37 PDT
You are visitor since 13 Dec 2003